Phonetics 2000 User Manual download pdf (Page 21)

Chapter 2: Installation

This chapter provides information to install the CPP Monitor 2000.

Please read the entire chapter before starting.

OPERATING ENVIRONMENT

The CPP Monitor 2000 should be mounted and operated in a clean,

dry environment. The unit is microprocessor controlled and as a

result it should not be installed near devices that generate strong

electromagnetic fields. Such interference is typically generated by

power switching equipment such as relays or contactors. A poor

operating environment may result in unwanted system resets and/or

system lockup. The temperature range the unit can operate in is

32°F to 122°F (0°C to 50°C). If the unit needs to operate below

freezing, a strip heater should be installed nearby.

MOUNTING THE UNIT

When you receive the unit, carefully remove it from the box.

Mounting tabs with holes are provided on the left and right sides of

the enclosure (see figure below). Mount the unit in a position that

allows easy access to the input terminal block, battery compart-

ment, on/off switch and the programming port. Also, there must be

a power outlet and telephone jack close to the unit.

CAUTION:The CPP Monitor 2000 is a sensitive electronic device. Personnel and

work area should be grounded before coming into contact with this device. Do

not install the CPP Monitor 2000 near strong electrostatic, electromagnetic,

magnetic or radioactive fields.

mounting dimensions

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 117 118

No comments

Phonetics 2000 User Manual Page 21