Phonetics 2000 User Manual download pdf (Page 39)

Chapter 4: Programming

To view a Data File Off-line:

1. Click the “Open” button on the Toolbar. The “Open Connection”

form will appear.

2. Choose a unit from the text box.

3. Click Edit on the “Open Connection” form. The name of the last

Off-Line Data File that was created or saved appears in the lower left

corner of the Unit Data form. Click “OK” to accept the file or click

the Browse button next to the filename to select another file.

4. Under Connection Mode, select “Off-line.”

5. Click “Connect.”

The Manager 2000 software will display the programming param-

eters as if you were connected with a unit. You can view these

parameters, but you can’t change them.

To delete a Data File:

Choose “File” from the main menu, then select “Delete Data File.”

Select the file you wish to delete and click “OK.”

To load an existing Data File into a CPP Monitor 2000 Unit:

1. Establish an on-line connection with a CPP Monitor 2000 (either

Local or via Modem).

2. Choose “File” from the main menu, then select “Load Data.”

3. Select the Data File you wish to load, then click “OK.”

The selected Data File will be loaded into the CPP Monitor 2000.

All existing programming in the unit will be overwritten.

SYSTEM PROGRAMMING

The System form includes the global system parameters that apply

to the unit in general. You must be on-line with the unit to program

the System parameters. Once you are on-line, choose Program from

the main menu, then select System. You can also access the System

programming from the Toolbar button labeled System.

Below is a list of the parameters, their default settings and the range

of programming for each parameter.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 117 118

No comments

Phonetics 2000 User Manual Page 39